Leading Edge is the exclusive North American supplier of Profilglass aluminum box spacer and welded, powder coated muntin bars. Every common size and color, imprinted with your name and IGCC certification, sold by the case.

A residential window carries its maker’s name. A commercial IG unit goes into a building, sealed into the structure, so the spacer has to say who made it. Most specifications require it.
We imprint your company name and IGCC certification along the spacer in our own facility before it ships, so it arrives ready for your line and ready for inspection.
Induction welded, bendable 3105 aluminum in 24 widths and four finishes, sold by the case.
Why ours bends clean →
Profilglass seamless, powder coated muntin in eight flat and contoured profiles, solid or two tone.
See the profiles →
The desiccant that fills the box spacer, from the same supplier, on the same truck.
The spacer sets the airspace, holds the desiccant and carries the seal. Ours is roll formed from a single strip of 3105 aluminum and induction welded along its length into a closed tube, so it bends cleanly, holds its shape and gives your sealant a smooth, even surface to bond to.
One profile height across every width keeps your line setup simple. Four finishes let the spacer disappear behind the sash or match the frame.
3105 is a manganese magnesium alloy chosen for its balance of strength and formability. The bendable grade is held to tighter mechanical limits than standard spacer, so it stretches around the corner radius instead of cracking.
| Property | Bendable, to 9.5 mm | Bendable, 10.5 mm up | Standard spacer |
|---|---|---|---|
| Yield strength | 140–180 N/mm² | 170–210 N/mm² | 180–250 N/mm² |
| Tensile strength | 150–190 N/mm² | 180–230 N/mm² | 190–260 N/mm² |
| Elongation | 14–22% | 7–13% | 3–13% |
Lower yield and higher elongation let the bar stretch around the corner without fracturing. Tensile values per UNI EN 485‑2, alloy chemistry per UNI EN 573‑3. Bending a frame? Specify the bendable profile.
Same dimensions in every finish. Change colors without changing bender or line settings.
Grids are one of the first things a homeowner notices. Our Profilglass muntin is roll formed from aluminum, induction welded into a closed profile and finished in a 100% polyester powder coat, so every bar looks clean and uniform from the street and from inside. Mill finish and anodized bars are available too.
When the design calls for more than straight lines, the Elizabeth bar bends into arches and sunbursts with a matching hub. Finish it in a wood grain, a solid color or two tone to match the frame inside and out.
Molded from tough Nylon 6, the same engineering plastic used for IG components across the industry, so they grip firmly in the frame and hold their shape inside the sealed unit. Every spacer width has a matching corner key and every muntin has matching connectors and end pins. One supplier for the complete system.
Nylon 6 keys sized to each spacer width, for a tight, square corner that keeps the frame flat and the sealant line continuous.
Steel connectors join spacer end to end, so you use full lengths and drops with less scrap. Every width from 5.5 mm up.
Internal crosses for flat bar and profile crosses for contoured, so grids lock square. Starbursts for decorative patterns in 3/16" × 5/8", 3/16" × 3/4" and 5.5 × 18.
Single prong, double prong and barbed for every flat bar and 8 × 18; single prong for 8 × 25. The grid stays centered in the airspace without rattling.
Box spacer is roll formed on Profilglass lines, then imprinted, packed by the case and shipped from Leading Edge warehouses, with the same service our residential customers count on.