INTERCEPT SPACER COIL

Every coil your Intercept line runs.

Leading Edge was the first coil supplier GED approved for Intercept equipment, and we are still the only one approved for every Intercept material. Tin plate, thin tin plate, bare stainless and our Blackline black, system matched and guaranteed to run.

Request a Quote See the Lineup
GED approved, every material
GED honors your equipment warranty when you run our coil.
Developed with GED
TPL, ThinStar and Blackline were built with GED engineering.
All prime material
Slit to +.000" / -.005" with a burr free edge.
Stocked across North America
Ohio, New Jersey, Dallas and consignment programs.
THE INTERCEPT LINEUP

Pick the coil that fits your line.

Every Intercept coil from one approved source. Start with Blackline, or match the tin plate or stainless you run today. Building commercial IG? Our aluminum box spacer is here too.

Blackline Intercept Warm Edge Spacer System
OUR FEATURED SPACER

Blackline. Black hides the spacer.

A silver spacer is the one thing the eye catches in a black window package. Blackline sits below the sightline and disappears, and its U shaped profile gives you the strongest corners available.

Blackline carbon steel
0.0105" for Intercept, 0.0078" for ULTRA. About half the cost of stainless.
Blackline Stainless
Stainless performance, finished in black.
Cutaway of a window sash showing the Blackline spacer below the sightline
0.0105" TIN PLATE · INTERCEPT

Tin Plate Lite

Designed with GED as an improvement on standard tin plate. Its formulation cuts tin build up on your Intercept dies and rolls, so the line runs longer between cleanings.

  • 90% less build up on roll formers
  • No equipment adjustments needed
  • Approved by four major sealant makers
TPL Data Sheet →
0.0078" TIN PLATE · ULTRA

ThinStar

A thinner Tin Plate Lite, built to interchange with 0.0078" EdgeStar stainless on ULTRA systems when the performance and cost of stainless aren't needed.

  • Swaps with 0.0078" stainless, with proper tooling
  • Cost per foot close to standard tin plate
  • GED's exclusive approved supplier
ThinStar Data Sheet →
0.0078" BARE STAINLESS · ULTRA

EdgeStar

Bare stainless for GED ULTRA. Impervious to gas transmission, with the strength and gas retention that help units meet Energy Star.

  • Improved warm edge thermal performance
  • Best strength and gas retention
  • System matched for GED ULTRA
EdgeStar Data Sheet →
Lengths of perforated aluminum box spacer
COMMERCIAL · STRUCTURAL GLAZING

Aluminum box spacer

Induction welded, bendable 3105 aluminum from Profilglass, imprinted in house with your name and IGCC certification.

  • 24 widths, .185" to 1.000"
  • Mill, clear anodized, bronze and black
  • Corner keys and connectors to match
See the box spacer →
WHY MANUFACTURERS SWITCH TO BLACKLINE

A better looking window that's easier on your line.

A cleaner sightline

Black spacer matches the black components across your package, so the whole window reads as one finished piece.

Easier on tooling

Blackline does not need to be hit as hard as bare stainless, so rollers and tooling on your Intercept line last far longer.

Runs on your line

Built for GED Intercept and ULTRA equipment. No new machine, just the coil.

Proven in the market

About 80% of Canadian Intercept users already run Blackline, and U.S. manufacturers are converting fast.

ON A CUSTOMER'S LINE

From coil to finished frame.

Blackline feeds, forms and bends on standard Intercept equipment, and comes off the line as a black frame ready for glass.

Leading Edge spacer coils loaded on a payoff stand at an Intercept line Black contoured muntin grid clipped into a finished Blackline spacer frame
Window and IG unit built with Blackline spacer and grid
COMPLETE THE BLACK LOOK

One supplier for the whole sightline.

Blackline pairs with black InterGrid, two tone grid coil and black clips from the same supplier, on the same truck. Fewer vendors, and a finish that matches from the spacer to the grid.

InterGrid in black → Two Tone Grid Coil → Clips and fasteners →
STOCKED SIZES

Sizes and slit widths

Spacer size Air space Slit width, 0.0105"
TPL, Blackline
Slit width, 0.0078"
ThinStar, EdgeStar, Blackline
7/32"1/4"0.862"0.882"
1/4"9/32"0.893"0.913"
11/32"3/8"0.986"1.006"
13/32"7/16"1.049"1.069"
15/32"1/2"1.111"1.131"
17/32"9/16"1.173"1.193"
19/32"5/8"1.237"1.257"
11/16"23/32"1.300"1.351"
23/32"3/4"1.363"1.383"
25/32"13/16"1.425"1.445"
Custom sizes on request. Full weights and tolerances are on each data sheet.

Coil specs

Core ID / Max OD
16" / 36"
Length per coil
About 6,400 ft at 0.0105", 8,500 ft at 0.0078"
Slit tolerance
+.000" / -.005", burr free edge
Blackline coating
Gloss black, non fogging polyester, both sides, 0-T bend
Approvals
GED Intercept · Energy Star · NFRC · H.B. Fuller · PPG · Kömmerling · ASTM E2188 / E2190
Data sheets
Blackline PDF Tin Plate Lite PDF ThinStar PDF EdgeStar PDF
STOCKED AND READY

Prime material, tight tolerances, on the shelf.

Every coil is wrapped in anti corrosive film and packed to prevent shipping damage. We set up just in time inventory around your demand, so you carry less and never run out.

Coil inventory on warehouse racks Operator running coil at the spacer line
Ready to run Blackline?
Tell us your machine, gauge and sizes. We'll set up samples and a stocking plan.
Request a Quote (440) 786‑2444